List of rotator controllers and their support status in HRD Rotator

[iv3ddm]

Hi!

Please can you add in the list "List of rotator controllers and there support status in HRD Rotator " the following line ?

Name: DDM_Rotor
Reference: IV3DDM http://www.qsl.net/iv3ddm/PROJ/DDM_ROTOR/DDM_ROTOR.HTM
HRD Support Status: Supported
Protocol: GS232A

This is a full project for a DIY controller for azimuthal rotor, with advanced features, simple to build, cheap and reliable in operation, suitable for use with various models of rotors.

Thank You,
Giorgio iv3ddm

[W8BFG]

Just FYI, HRD development (changes, additions, etc) is basically on hold, so very little chance your request will be added any time soon.

[iv3ddm]

Hi Bernie, Tnx for your reply.

I believe that my request was not clear, I do not request changes to the program, but whether it was possible the inclusion of information on this page:

http://wiki.ham-radio-deluxe.com/ind...or_controllers

73 Giorgio iv3ddm

[W8BFG]

Oh, ok, understood. Sorry for the confusion, I didn't notice this was in the Wiki Forum. Plez forgive a befuddled old man.

I don't know who maintains the Wiki, but hopefully they'll get in touch with you.

[VE2DX]

I do I will take care of this...

can you send me some info on your interface at ve2dx at hotmail dot com

and confirmation youve tested it witht the results...

73

Richard ve2dx

[iv3ddm]

Hi Richard!

All information about this project are available on my website at: http://www.qsl.net/iv3ddm/PROJ/DDM_ROTOR/DDM_ROTOR.HTM
I confirm that the controller DDM_Rotor was successfully tested with both version 4 and version 5 of HRD Rotator Package of Ham Radio Deluxe.
Of course, since it uses the well-known protocol Yaesu GS-232A, DDM_Rotor is compatible with many other programs for the management of the azimuthal rotator.

73 Giorgio iv3ddm